RM 2000 Series - Remote Monitoring

Series: RM 2000
Questions? Contact Littelfuse Support
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The RM2000 is a motor-monitoring device to be used in conjunction with the 777 family of products (excluding the P1 Series), 77C family of products and the Model 601 voltage monitors, via Modbus protocol with a communications module. The RM-2000/777 motor management system combines unsurpassed electronic motor protection and critical, user-friendly, motor monitoring.
The RM2000 has membrane keypad controls which allow both monitoring and control of a 777 relay through an RS-485 network using Modbus RTU protocol. A second communication port allows monitoring and control of up to 99 RM-2000 devices from a PLC, DCS, or SCADA system or a PC with Solutions software installed. The RM2000 will act as a repeater for its motor protector when accessed from the host computer or PLC. In addition to the monitoring functions, the RM2000 can be used to reset a tripped relay.
The RM2000 is easily mounted remotely and improves safety for service and operations personnel by allowing them to control and monitor the device without opening the electrical cabinet. Using the RM2000 is a simple, cost-effective method for aiding compliance with arc flash safety regulations. The enclosure and keypad assembly is water and ultraviolet light resistant.

Product Literature

For Technical Questions

Call +1 800-832-3873 or email us at relays@littelfuse.com 

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)		Termination TypeMounting MethodDimensionsWeight (lbs/g)AddressBaud Rate (Bps)Communications InterfaceCommunications ProtocolCommunications RangeHumidityInput AC Line Frequency (Hz)Input Tolerance (%)LifeMaximum Input PowerStockSamplesCompare
RM2000115 Vac3 in.-lbs.Surface mountable on backplane using 4 screws6.4 H x 6.1 W x 1.1 D in. (162.6 x 154.9 x 27.9 mm)0 KgA001 - A099300 - 28800RS-485Modbus RTU50 ft; 4000 ft with separate isolated power supplyUp to 85% non-condensing50 / 60±10%3CheckOrder
RM2000-CBM+115VAC3 in.-lbs.Surface mountable using 4 screws6.40 in H x 6.10 in W x 1.10 in D (162.6 x 154.9 x 27.9 mm)1.2 lbs. (19.2 oz. 544.31 g)A001 - A099300 - 28800RS-485Modbus RTU50 ft 4000 ft with separate isolated power supplyUp to 85% non-condensing±10%Mechanical: 100 000 actuations3W
RM2000-RTDW115VAC3 in.-lbs.Surface mountable using 4 screws6.40 in H x 6.10 in W x 1.10 in D (162.6 x 154.9 x 27.9 mm)1.2 lbs. (19.2 oz. 544.31 g)A001 - A099300 - 28800RS-485Modbus RTU50 ft 4000 ft with separate isolated power supplyUp to 85% non-condensing±10%Mechanical: 100 000 actuations
To request product environmental information, please complete the Product Environmental Information Request Form.