777-P2 - 777 MRSW Series

Series: 777 MRSW
Questions? Contact Littelfuse Support
Littelfuse Remote Indication and Monitoring
Roll Over to Zoom
The 777 Manual Remote Reset Kit allows the 777 line of motor and pump protection products to be manually reset without opening the panel door. Simply connect the 9-pin adapter to the 777 communication port and mount the push-button switch in a convenient location.

Product Literature


Property (Mouseover for details) Value
Input Voltage (V) 200 to 480VAC
Maximum Input Power 10W
Output Form SPDT - Form C
Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 10A @ 240VAC
Full Load Amp Range (A) 2 - 20A (looped conductors required); 20 - 90A (direct); 80 - 800A (external CTs required)
Timing Accuracy (%) ±0.5s
Rapid Cycle Timer (s) 0 - 999s
Restart Delay Range All faults except undercurrent: 2 - 500m; Undercurrent: 2 - 500m A (Automatic); # of Restarts: All faults except undercurrent: 0 1 oc1 2 oc2 3 oc3 4 oc4 A ocA (Automatic); Undercurrent: 0 1 2 3 4 A (Automatic)
Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (<100 amps direct)
Overvoltage Trip Voltage (%) 172 - 528V
Undervoltage Trip Voltage 170 - 524V
Voltage Unbalance Trip Point (%) 2 - 25% or 999 (disabled)
Voltage Accuracy (%) ±1%
Overcurrent Trip Point (20A - 100A) … MULT of 80 - 140% of CT primary
Overcurrent Trip Class 02 - 60 J02 - J60 L00 - L60 or OFF
Undercurrent Trip Point (0 10 - 98 Amps) … MULT or 40 - 140% of CT primary
Undercurrent Trip Delay (s) 2 - 999s (default)
Current Unbalance Trip Point (%) 2 - 50% or 999 (disabled)
Current Accuracy (%) ±3% (<100 amps direct)
Ground Fault Current Trip Point (A) (3 - 20A) … MULT or 12 - 40% of CT primary or OFF
Ground Fault Accuracy (%) ±15%
Sensor Hole Size Max conductor size: 0.65 in (with insulation)
Short Circuit (kA) 100kA
Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
Protection Class IP20
Pollution Degree 3
Address A01 - A99
Life Electrical: 1 x 105 operations at rated load; Mechanical: 1 x 106
Termination Type Torque: 7in-lbs
Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
Operating Temperature -20° to 70°C (-4° to 158°F)
Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
Humidity 10-95% non-condensing per IEC 68-2-3
Dimensions 3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)
Weight (lbs/g) 1.56 lbs. (25.0 oz. 707.6 g)
To request product environmental information, please complete the Product Environmental Information Request Form.