MP8000 Series - Bluetooth Overload Relay

Series: MP8000
Questions? Contact Littelfuse Support
mp8000-bottom
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The MP8000 is an advanced motor protection electronic overload relay that is fully programmable via Bluetooth* using an iPhone* or Android* smartphone or tablet with the Littelfuse App. It is easy to use and arc-flash safety is increased because the app allows settings to be modified and real-time operational information viewed. Viewing operational information and faults on the app does not require the user to open the control panel. The MP8000 protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amperes). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application.

Protection is unsurpassed by combining overload, voltage, phase loss and reversal, voltage and current imbalance, power monitoring, and underload in one package. For standalone applications, the Bluetooth* interface can be used when paired with a smartphone or tablet. The units also feature an Ethernet communications port that can be used to form an Ethernet Modbus TCP/IP or Ethernet/IP network. Units can be remotely monitored and controlled from a PC, or SCADA system, and data logging through a PC with the optional MP8000 software or other software program using the MP8000 memory map. This capability allows for a simple cost-effective way to further enhance arc-flash safety.

*Bluetooth, iPhone and Android are registered trademarks of their respective owners.

Product Literature

 

 

Access specifications, certifications, check availability and order parts below

Catalog #Supply
Voltage
VAC		Input
Voltage (V)		Output
Form		Termination TypeMounting MethodFull Load Amp Range (A)DimensionsWeight (lbs/g)Overcurrent Trip ClassCommunications InterfaceCommunications ProtocolCommunications RangeConformally coatedCurrent Accuracy (%)FrequencyStockSamples
MP800085 - 26490 - 690 Vac (use of external PTs can extend the upper range above 690 Vac)Control relay: SPST - Form A; Auxilliary relay: SPDT - Form CTorque: Depluggable terminal blocks: 7 in-lbs; Earth ground: 7.9 in-lbsSurface mount (4 - #8 screws) or DIN rail mount0.5 - 10 direct; 100+ (external CTs required)2.91 H x 4.08 W x 4.79 D in. (73.9 x 103.6 x 121.7 mm)0 Kg02 - 60 or linearBluetooth; Ethernet Modbus TCP/IP or Ethernet/IPEthernet Modbus TCP/IP or Ethernet/IPBluetooth range is up to 30 ft (range may be reduced depending on the smartphone/tablet used; enclosure type; or environmental factors)Yes±2% (2 to 100 A direct)50/60 HzCheckOrder

To request product environmental information, please complete the Product Environmental Information Request Form.