ISS 102 Series - Two-Channel Intrinsically Safe Switch

Series: ISS 102
Questions? Contact Littelfuse Support
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable.
-LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds.
-DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds.
-MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.

Product Literature

For Technical Questions

Call +1 800-832-3873 or email us at relays@littelfuse.com 

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)		Output
Form		Termination TypeMounting MethodDimensionsWeight (lbs/g)Input AC Line Frequency (Hz)Input LogicIntrinsically Safe Circuit LocationMaximum Input PowerOutput Load Rating (VA)Sense VoltageSensitivity (Ohms)Sensor ModeStockSamplesCompare
ISS-102A-LC120 Vac nominalOne Form ATorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)4.7 - 100Differential / Latching; 1-channel or 2-channel switchCheckOrder
ISS-102AA-DCS120 Vac2 Form ATorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)1002-channel switchCheckOrder
ISS-102ACI-MC120 Vac nominalOne Form A and One isolated Form CTorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Direct or invertedDivision 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)4.7 - 100Differential / Latching; 1-channel or 2-channel switchCheckOrder
ISS-102C-M-LC120 Vac nominalOne Form CTorque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12 - 20 AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)35mm DIN rail or Surface Mount (#6 or #8 screws)3.5 H x 2.08 W x 2.35 D in. (88.9 x 52.9 x 59.7 mm)0 Kg50 / 60Division 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III2Pilot Duty: 180 VA @ 120 Vac C150; General Purpose: 5 A @ 120 Vac5 Vdc pulsed (probe)100Differential / Latching; 1-channel or 2-channel switchCheckOrder
ISS-102CCI-M-MC0 KgCheckOrder
To request product environmental information, please complete the Product Environmental Information Request Form.