ECS Series - Current Sensor

Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensing control. Its built-in toroidal sensor eliminates the inconvenience of installing a stand-alone current transformer. Includes onboard adjustments for current sensing mode, trip point, and trip delay. Detects over or undercurrent events like locked rotor, loss of load, an open heater or lamp load, or proves an operation is taking place or has ended.


Operation
Input voltage must be supplied at all times for proper operation. When a fault is sensed throughout the trip delay, the output relay is energized. When the current returns to the normal run condition or zero, the output and the delay are reset. If a fault is sensed and then corrected before the trip delay is completed, the relay will not energize and the trip delay is reset to zero.

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)
Output
Form
Termination TypeMounting MethodDimensionsWeight (lbs/g)CircuitryHumidityInput AC Line Frequency (Hz)Input Tolerance (%)Insulation ResistanceIsolation Voltage (V)LifeOutput Load Rating (VA)Output TypeStockSamplesCompare
ECS20BC24 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS21BC24 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS2HBC24 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS30AC24 VdcIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS31AC24 VdcIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS40A120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS40AC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS40BC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS41A120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS41AC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS41BC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS41BD120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS41BH120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS4HBC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS4HBH120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS60AH230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS60BC230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS61BC230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECS6HAH230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH30AC24 VdcIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH31AD24VDCIsolated SPDT0.25 in. (6.35mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)≅6.4oz (181g)Encapsulated95% relative non-condensing-15-20%≥100 MΩ≥2500V RMS input to outputMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/2hp @ 250VACElectromechanical relay
ECSH40A120VACIsolated SPDT0.25 in. (6.35mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)≅6.4oz (181g)Encapsulated95% relative non-condensing-20--10%≥100 MΩ≥2500V RMS input to outputMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/2hp @ 250VACElectromechanical relay
ECSH40AC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH40AD120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH41AC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH41AD120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH41BC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH41F.08D120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH4HAD120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH4HF.08D120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH61AD230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL31A24 VdcIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL40AC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL40BH120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL41A120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL41AD120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL41AH120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL4HAC120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL4HBH120 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL61AH230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSL6HAC230 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-20 - 10%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relayCheckOrder
ECSH21F2.5C
Obsolete: 2020 -10-07
24 VacIsolated SPDT0.25 in. (6.35 mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.5 H x 2.5 W x 1.75 D in. (88.9 x 63.5 x 44.5 mm)0 Kg95% non-condensing50 / 60-15 - 20%≥100≥2500 Vrms input to output10 A resistive @ 240 Vac; 1/4 hp @ 125 Vac; 1/2 hp @ 250 VacElectromechanical relay
ECSH34F.08C
Obsolete: 2020 -10-05
24VDCIsolated SPDT0.25 in. (6.35mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)≅6.4oz (181g)Encapsulated95% relative non-condensing-15-20%≥100 MΩ≥2500V RMS input to outputMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/2hp @ 250VACElectromechanical relay
ECSH3HF0.08D
Obsolete: 2020 -10-05
24VDCIsolated SPDT0.25 in. (6.35mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)≅6.4oz (181g)Encapsulated95% relative non-condensing-15-20%≥100 MΩ≥2500V RMS input to outputMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/2hp @ 250VACElectromechanical relay
ECSL40B
Obsolete: 2020 -10-05
120VACIsolated SPDT0.25 in. (6.35mm) male quick connect terminals (5)Surface mount with two #6 (M3.5 x 0.6) screws3.50 x 2.50 x 1.75 in. (88.9 x 63.5 x 44.5 mm)≅6.4oz (181g)Encapsulated95% relative non-condensing-20--10%≥100 MΩ≥2500V RMS input to outputMechanical - 1 x 106; Electrical - 1 x 10510A resistive @ 240VAC; 1/4hp @ 125VAC; 1/2hp @ 250VACElectromechanical relay
Part # Part Description RoHS Pb-free RoHS (2015/ 863/EU) Certificate REACH (SVHC’s) Declaration Halogen Free REACH (SVHC’s) IPC-Material Declaration
ECS40BC CURRENT SENSOR RoHS No 12/26/2017 PbFree No 12/26/2017 Yes
12/26/2017
ECSL40AC CURRENT SENSOR RoHS No 04/23/2021 PbFree No 04/23/2021 Yes
04/23/2021
If the product environmental information that you are looking for does not appear in this tab,
please complete the Product Environmental Information Request Form.