PGA-LS25 Series - Fiber-Optic Sensor

External overview image
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The arc detecting fiber sensor PGA-LS25 (5 m (16.4 ft) active; 8 m (26.2 ft) total) is built to detect arcs along its entire length. It is meant to be installed with the fiber along the back wall of switchboards, covering all compartments with just one sensor. The sensor must be installed in such a way that it has a line-of-sight to all powered connections, where an arc could develop. The sensor is able to detect light from all angles around it. The detection radius is dependent on the arc power. At a trip level setting on the PGR-8800 of "1", the A2000 will react to all arcs of more than 3 kA within a 1 meter radius, dependent on the width of the compartments and thus of the length of fiber which is exposed to the light from an arc.

Access specifications, certifications, check availability and order parts below

Catalog #
PGA-LS25
To request product environmental information, please complete the Product Environmental Information Request Form.